产品分类结果页

ꂃ ꁹ

LS-71 Green Silicon Carbide Burr

Silicon carbide is a very aggressive abrasive next to diamond, it cuts fast and leave a uniform finish, perfect for adding depth and shade to gemstone like jade, agate, jasper, gemstone cabochons, glass and ceramics.
Not as bright a finish as a diamond burr, it will dull down to a slightly softer tone.
Mounted on a 2.35 mm(3 mm) shank, silicon carbide grit to choose from.(#60/100/120/150/180/240/320)

¥ 0.00

立即购买
LS-72 Electroplated Diamond Carving Points

Electroplated Diamond Carving Points are excellent tool for stone carving, with diamond coated on tip, tip size 1-10mm, shank size 2.35mm(or 3 mm)
Diamond grit to choose from, #80(coarse), #120(medium fine grit), must use with water.
Shape can be cylinder, Round cylinder, INVERTED TRUNCATED CONE, TRUNCATED CONE, bullet, flat disc.
Although a shorter life span compared with sintered diamond carving burr, but a great choice for beginners.

¥ 0.00

立即购买
LS-73 Sintered Diamond Carving Points

Sintered diamond carving bits provide reliable cutting and are extremely durable with a long life span, with a shaped diamond head made from a thick uniform matrix of diamond powder(#70/320/600) embedded, the tip is fully sintered, not only coated or plated on the burr, tip size 1-10mm, shank 2.35mm.
Used for gemstone llike opal, jade, ceramics and glass. Highly recommended for experienced carvers.
Sintered diamond bur shape can be ball shape, cylinder shape, round cylinder, flat disc, INVERTED

¥ 0.00

立即购买
LS-74 Felt Buff Polishing Points

These hard felt burrs used for polishing and buffing with your rotary handpiece after carving and diamond burrs, charged with polishing compound like cerium oxide, will do excellent job for polishing gems, stones, and glass.
These felt buffing burs are constructed with tightly compressed natural wool felt, and available in different shapes with a 2.35 mm shank to fit your Foredom.
Shape can be bullet(6*18 mm), rond cone(10*13 mm), cylinder(8*15 mm, 10*18 mm, 13*19 mm), ball(6/10/13/19 mm), wheel

¥ 0.00

立即购买
LS-75 2.35 mm 3mm Shank Electroplated Diamond Carving Points Set 30PCS

Diamond carving points set, with 30 pcs of burr in different sizes and shapes, used for gemstone like jade, agate and quartz stone carving work.
Shank diameter can be 2.35mm or 3mm, length 45mm.

¥ 0.00

立即购买
LS-76 50PCS Electroplated Diamond Carving Points Set

Diamond carving points set, with 50 pcs of burr in different sizes and shapes, used for gemstone like jade, agate and quartz stone carving work.
Shank diameter 3.17mm, length 45mm.
One set with small tip size, one set with big tip size.

¥ 0.00

立即购买
LS-77 1'' Flexible Diamond Polishing Points

The flexible polishing points, is made from flexible diamond polishing pad, these small polishing points with velcro backing, which can easily stick to the hand polishing machine.
Must use with water, diameter 1''(25mm), with different grit choose from, 50/100/150/300/500/800/1000/1500/2000/3000/6000/8000/10000#
Used for gemstone like jade, agate, quartz stone polish use.

¥ 0.00

立即购买
LS-78 Sandpaper Polishing Points Sandpaper Burr

This kind of sandpaper polishing points, used for stone, wood, metal polish use.
2.35mm shank, with different grit choose from, 80/180/240/320/400/600/800/1000/1200/1500/2000/2500/3000/5000/7000#
Tip length 30mm, used for hand polishing machine, flex shaft, can use with water.

¥ 0.00

立即购买
A Shape Cylinder Diamonc Carving Points

Cylinder Electroplated Diamond Carving Points are excellent tool for stone carving, with diamond coated on tip, tip size 1-10mm, shank size 2.35mm(or 3 mm)
Diamond grit to choose from, #80(coarse), #120(medium fine grit), must use with water.
Although a shorter life span compared with sintered diamond carving burr, but a great choice for beginners.

¥ 0.00

立即购买